Products

WLAN functionality for UV Control (option)

UV Control 4C TFT, 4CT TFT, 4C LED TFT

Integrator for measuring UV intensity and dose plus temperature*

  • intensity in mW + Dose in mJ for UV-A, -B -C, VIS, UV-LED (UV Control 4C LED)
  • Full UV intensity in mW/cm² + Dose in mJ/cm²
  • Temperature in °C / °F (UV Control 4CT)
  • Storage of all measured values on SD card
  • Colour display for graphical and numerical display of the measured values
  • PC software with many user-friendly features

The UV Control Microprocessor Integrator is UV multi-channel-measuring instrument for curing applications. It is designed to measure, record and display peak UV intensity, UV dosage and temperature.

Due to its different UV sensors and the integrated microprocessor the UV Control can measure, record and display the peak of the UV intensity for each UV band individually. Additionally, this UV-Integrator is calculating the uv dosage of the uv energy supplied during the time of exposure of one measuring cycle for each uv bandwidth separately. This allows to determine not only the total energy, but also how that energy is delivered, i.e. what intensity and dose at what uv band. The sensors are on the reverse side of the unit which also serves as a heat shield. After completion of the measuring cycle all measuring results can be scrolled through on the built in TFT colour display.

The readings are stored on the included SD card and can be downloaded to a PC, edited and stored, e.g. to document a diagram based on the measured values history of a UV lamp through graphics. A simple data export to spreadsheet programs is possible. The LED version of the UV control has switchable measuring ranges to measure either UV medium pressure lamps (up to 2000 mW/cm) or UV LEDs (up to 20 W/cm).

Data sheet